These days, flat roofs are popular for both homes and businesses because they look modern and make good use of room. These roofs do have some problems, though, just like any other kind of roof. It is important to know about these common flat roof issues and how to fix them so that your building stays strong. A trustworthy roofer can help you deal with these problems in the best way possible.

1. Pools of water

One problem that happens a lot with flat roofs is that water pools. A sloping roof lets water drain off, but a flat roof can get spots where water pools, especially after it rains a lot. Over time, this pooling can cause leaks and damage to the building.

The answer is: Look for any indications of water accumulating on your roof on a regular basis. Make sure that the drains, downspouts, and other drainage systems are clean. If the water keeps pooling, you might want to add tapered insulation to make a small slope that lets the water drain better. A skilled roofer can help you look at these options and put them into action.

2. Leaks and damage from water

Flat roofs often have problems with leaks as well. They can happen for a number of reasons, such as bad fitting, material wear, or holes made by debris. Leaks can cause a lot of water damage inside a building over time.

The answer is: Leaks can be found early with regular checks. To find water damage, look for spots on the ceiling or walls and cracks or blisters on the roof. If you think there might be a leak, you should call a roofing contractor right away so they can do a full check and make any repairs that are needed.

3. Damage to the membrane

A membrane system, like EPDM or TPO, is often used on flat roofs to keep water out. Damage to these membranes can happen from UV light, bad weather, or normal wear and tear.

The answer is: Set up regular repair checks to see how the membrane is doing. If you see any tears, cracks, or blisters, you should take care of them right away. A roofer can fix or replace broken parts of the membrane to get it working properly again.

4. Not enough insulation

If you don’t have enough insulation, your heating and cooling systems will have to work harder to keep you comfortable. This can cause energy bills to go up and make the temperature inside feel hot.

The answer is: Check the insulation on your roof often. If you think the insulation isn’t good enough, you might want to add more or switch to a better material. A roofing contractor can give you expert help on how to make your roof more insulated.

Final Thoughts

While flat roofs can be a great choice for architecture, they do need to be taken care of to avoid common issues. Contact us at 118-35 Queens Blvd Forest Hills, NY 11375 (718) 414-6067  https://www.nycrenovators.com to set up a meeting!